Yokis – Urmet Spa

Search

Can I use two different accounts to manage the V-Stream App from Yno?
Can I manage the shutter modules by % from the YnO App?
Following an alarm, is it possible to control the opening or closing of the shutters using an intrusion alarm control unit contact?
If there is a HUB in the system, when is it necessary to use the YOKIS PRO App?
In a YOKIS system, in case of thermarp module (5454489) installation in radio mode for remote management, which precautions must be taken?
In a YOKIS system, the thermarp chronothermostat module (5454489) can be powered through the home power supply?
In a YOKIS system, is the thermarp chronothermostat module (5454489) only used in radio mode?
In a YOKIS system, how many thermarp chronothermostat modules (5454489) in radio mode can be managed in a single system?
Is it possible to connect Yokis HUB to a LAN network not equipped with WiFi connection?
What is the “children’s room night light” function available with the MTK500E and MTV500ER YOKIS modules?
Which loads can be connected on YOKIS modules?
In a wired YOKIS system, what is the driver wire’s function?
What happens if a pushbutton connected to a YOKIS timer module remains blocked?
Which is the maximum duration that can be programmed on timed YOKIS modules?
Is it possible to connect wired local pushbuttons on YOKIS radio modules?
In the event of a blackout, do YOKIS relay modules maintain their open/closed status?
In a YOKIS system, is it possible to enable the automatic closing/opening of window shutters at a given time?
When is it necessary to have YOKIS HUB?
What is needed to use the YOKIS PRO programming app?
Which feature must receiver modules and transmitter modules have to be programmed by the installer using the YOKIS PRO app?
In addition to light and window shutter control, what else can be managed with YOKIS modules?
Can the end user use the YOKIS PRO app? What is YnO app?
How many YOKIS window shutter modules can be centralised simultaneously?
In a YOKIS system, what is the difference between direct centralisation of radio modules and centralisation through radio bus?
What is the YOKIS radio receiver modules’ maximum range?
In a YOKIS system, is it possible to program one pushbutton/channel to turn the lights on and one pushbutton/channel to turn the lights off on the same transmitter or on 2 different transmitters?
In a YOKIS system, is it possible to program a pushbutton/channel for up movement of window shutters and a pushbutton/channel for their down movement on the same transmitter or 2 transmitters?
Is there a reset procedure for YOKIS radio receivers?
Is there a RESET procedure for the single pushbutton (channel) of the YOKIS radio transmitter?
Is it possible to use a YOKIS radio receiver with several functions at the same time?